Tires are the only part of your car that touches the road. Checking them takes five minutes and a penny.Here's how to do it, using NHTSA's guidance.
Key takeaways
NHTSA says tires should be replaced when tread wears down to 2/32 inch.
Penny test: put Lincoln's head upside down in the groove. If you can see all of his head, it's time for new tires.
Built-in treadwear bars between the grooves also show when a tire is worn out.
Check tire pressure monthly and before long trips, including the spare.
Three ways to check tread
Method
How
Penny test
Lincoln's head down in the groove. Whole head visible means 2/32 inch or less.
Treadwear bars
Raised bars in the grooves. When they're even with the tread, replace the tire.
Tread gauge
A cheap gauge gives an exact reading in 32nds of an inch.
Based on NHTSA tire guidance.
Tire age
Rubber ages even when tread looks fine. Every tire has a DOT code on the sidewall, and the last four digits show the week and year it was made. For example, 2321 means the 23rd week of 2021. Ask a tire professional to look at older tires.
Pressure
Use the pressure on the label in the driver's door jamb, not the number on the tire sidewall. Pressure drops as it gets colder, so check more often in winter.
Check all four tires and the spare with a penny during your test drive.
Run the VIN for recalls at nhtsa.gov/recalls. It takes about a minute.
Read the Buyers Guide on the window. Federal rules require one on every used vehicle a dealer offers for sale, and it shows whether the vehicle comes with a warranty or is sold as is.
Ask about service contracts. We offer plans from Integrity and Alpha. Coverage levels, terms and labor rates differ from plan to plan, so ask which ones fit the vehicle you like.
Take a real test drive with some highway miles on I-94 or the toll road, and try the brakes, steering and climate controls.